Can you connect Airpods to a different case [Step by Step Guide]

You may end up losing your AirPods case or the Airpods itself, causing you to buy a replacement case or AirPods. So, what do you do when you get a replacement case? You will have to connect AirPods to a different case.

Can you connect Airpods to a different case? In this article, we will teach you if and how you can connect AirPods to a different case.

Can you connect Airpods to a different case?

In most circumstances, charging your Airpods while inside a case is possible. Because the charging cases for Airpods are interchangeable, you can obtain a new one if your old one is lost or broken.

Some early Airpod versions might not be compatible with the more recent charging cases for Airpods. The majority of Apple’s Airpod and Airpod Pro models, however, can link and charge with a variety of charging cases.

The charging status of your Airpods may be checked via the LED indicator on the charging case’s side. If the Airpods are properly plugged in and ready to charge, a green Light will appear.

Step-by-Step Guide

In a new or different case, pairing and charging your Airpods entails a simple and quick procedure.

The fact that Airpods may sync to different charging cases is quite advantageous. It would be costly and unnecessary to buy new Airpods with each new charging case because charging cases are readily lost, forgotten, or misplaced.

Other manufacturers are now able to provide customers with a selection of distinctive charging cases that may better suit their preferences or way of life thanks to this open-minded attitude. To securely pair your Airpods with a separate charging case, simply follow the instructions below:

1. For your Airpods to charge, your case must have enough power. When attempting to pair or charge your Airpods, make sure the case is charged. After the case is prepared and able to pair a green light will appear on its side.
2. Place each Airpod inside its case mold after opening the Airpods case. The Airpods may not pair or charge properly if they are not properly inserted within the casing.
3. Press and hold the setup button on the side of the case while the Airpods are inside for a few seconds. This will start the pairing process between your Airpods and the new case.
4. Await the white to red or orange flash of the LED indicator. Open the charging case close to your iPhone when this color light starts to flash.
5. To start pairing, setup instructions must show on your phone’s screen. Your Airpods should pair with their new case correctly if you adhere to the instructions that are displayed on the screen.

To find out more about this, watch the video attached below!

Troubleshooting

The only thing worse than losing an AirPod is discovering that the new pair won’t pair with your old ones. Generally, a minor software problem is to blame for this, which you can resolve by taking the actions listed below.

After completing each of the actions listed below, try pairing your replacement AirPod, AirPod Pro, or charging case once more.

Step 1

The first step is to remove your AirPods from Bluetooth settings. Every AirPod can appear to be from a different set on your iPhone. Removing both AirPods from your Bluetooth settings will typically fix this.

1. Go to Settings > Bluetooth on your iPhone.
2. Forget This Device by selecting it after the I button next to your AirPods.
3. Tap i to erase each AirPod if there is more than one.

Step 2

Upgrade the iPhone’s software.

Out-of-date Your replacement Airpod’s firmware update could be prevented by iPhone software.

1. To check for new updates, connect your iPhone to Wi-Fi and navigate to Settings > General > Software Update.
2. Download and apply any updates that are offered.

Step 3

AirPods’ firmware should be updated.

If the firmware on both AirPods is incompatible, they might not be able to communicate effectively. By triggering a firmware upgrade with the charging case, you can resolve this.

1. Place the case’s lid on top of the AirPods.
2. To connect your AirPods case to power, use a Lightning wire.
3. So that the AirPods may download fresh firmware over the Internet, keep your iPhone close by—within four inches.
4. Ideally, wait for 30 minutes. During this period, refrain from opening the case, removing the cord, or taking your iPhone anywhere.

Step 4

Pair each AirPod separately.

1. One AirPod at a time pairing worked well for some users. This method requires some finesse, and you might need to repeat it several times before it takes, but it’s still worth a shot.
2. Place one AirPod in your ear, then put the other one back in the case.
3. Hold the Setup button down while the lid is open until the white status light starts to flash.
4. Try pairing the other AirPod after switching them around.
5. Return both AirPods to the case after pairing each one separately, then attempt pairing once more by holding the Setup button down.
6. If it doesn’t work, delete both AirPods from your iPhone’s Bluetooth settings and attempt pairing them again.

Step 5

Leave your AirPods plugged in and disconnected.

1. Some consumers discovered that their pairing troubles were resolved by removing their AirPods before starting a firmware update. Put it to the test.
2. Go to Settings > Bluetooth on your iPhone.
3. Forget This Device by selecting it after the I button next to your AirPods.
4. Tap I to erase each AirPod if there is more than one.
5. Close the cover on the charging case after putting back both AirPods in.
6. Your charging case should be plugged in next to your iPhone for at least an hour using a Lightning wire to connect it to electricity.

FAQs

Summing Up

Getting a replacement case for your AirPods is easy. The harder part is connecting your AirPods to the new case. Hopefully, through this article, you now know how to connect AirPods to a different case!

Listening to music while showering is great. What if you have AirPods? Click this link to know the answer to the question “Can You wear Airpods In The Shower?“