How to Program Charter Remote Codes: The Complete Explanation

This guide is for you if you’ve just received a new Charter remote, or if you’ve misplaced your old one and need to program a new one.

In this post, we’ll go over the complete process step-by-step so that you know How to Program Charter Remote Codes with your TV and have your remote up and running in no time.

How to program Charter Remote Codes- Complete Explained

First, let’s take a look at what you’ll need in order to program your Charter remote:

  • The make and model of your TV or another device
  • And charter codes

Once you have those three important pieces of information, you’re now ready to get started. Keep reading for the complete guide on how to Program Charter Remote Codes.

What Is a Charter Remote Code?

A Charter remote code is a unique number assigned to your Charter remote control. This code is used to identify the make and model of your remote so that it can be programmed to work with your TV.

The code is usually four digits long and can be found in the manual that came with your remote control. If you don’t have the manual, you can usually find the code on the manufacturer’s website.

Once you have the code, you’ll need to enter it into your Charter remote to be programmed to work with your TV.

How to Program Charter Remote Codes?

Now that you’ve got your Charter remote control in hand, it’s time to get it programmed so you can start using it. Here’s a step-by-step guide to help you do Program Charter Remote Codes.

  1. Turn on the tv.
  2. Point the remote control at the receiver and press the TV button once.
  3. Then press and hold SETUP until the LED blinks twice.
  4. Enter the code you wrote down earlier. If the LED flashes for a long time, the code you entered is incorrect. Pairing is successful if the light flashes once.
  5. Press the power button to turn off the TV and check if it is paired.

If you have an Element tv and want to program it here’s the method.

How to Find the Right Charter Code for Your TV or Other Device?

The first step is to find the right code for your TV. You can do this by looking in the manual that came with your Charter remote, also you can find the list of the codes online.

Once you have the code, you’ll need to program it into your remote. This can be done by following the instructions in your remote’s manual, or by using the Charter website and Program Charter Remote Codes.

Codes

LG: 11423, 10017, 11265, 10178, 10700, 10856, 11178, 11768

Samsung: 10812, 10060, 10702, 10178, 10650, 10766, 10814

Sharp: 10818, 10093, 10688, 10851

Sony: 10000, 10810, 10834, 11317

Toshiba: 11524, 10156, 11265, 10060, 10650, 10822, 10832, 10845

Vizio: 11758, 10864, 10885, 11756

Tips for Programming Your Charter Remote

If your home entertainment device does not respond to the Remote Control after trying all of the codes listed above for your brand, or if your brand is not listed at all, try searching for your code.


NOTE: Use the following device code digits to control a specific device:
0 = Cable (dedicated to cable only)
1 = TV
2 = DVD/VCR
3 = Audio


To search for the code of your TV:

  1. Turn on your TV.
  2. On the remote control, Press the TV key once; it blinks once. Then press
    and hold SET UP until the TV key blinks twice.
  3. Enter 9 9 1. The TV key blinks twice.
  4. Press 1 and aim the remote control at the TV and press POWER once.
  5. Press and release the CH+ key continuously, then stop when the
    TV turns off.
  6. Press POWER. The TV should turn on, then press SET UP to lock
    in the code

How to Program Your Charter Remote With a 3-Digit or 4-Digit or 5-Digit Code?

The great thing about programming your Charter remote with a 3-digit or 4-digit code is that it’s really easy to do. You can find the code for your specific TV model in the Charter user guide, or you can look it up online. Here are the steps:

  1. On the remote control, press the TV key once; it blinks once. Then press
    and hold SET UP until the TV key blinks twice.
  2. Enter 9 9 0. The TV key blinks twice.
  3. To view the code for the first digit, press 1 once. Count the
    number of times the TV key blinks (e.g., 3 blinks = 3) and write
    down the number in the leftmost TV Code box above.
    NOTE: If a code digit is 0, the selected mode key does not blink.
  4. Repeat step 3 four more times for the remaining digits. Use 2 for
    the second digit, 3 for the third digit, 4 for the fourth digit, and 5
    for the fifth digit. Finish writing down the code in the TV Code
    boxes above.
  5. Enter your codes into your remote and voila!

FAQs

Do I need to be a Charter customer to program my remote?

No, you do not need to be a Charter customer to program your remote. And can Program Charter Remote Codes yourself.

What is the difference between a Cox code and a Charter code?

The difference between a Cox code and a Charter code is that Cox codes are four digits long, while Charter codes are six digits long which can help to Program Charter Remote Codes.

Conclusion

By now, you should be an expert on How to Program Charter Remote Codes. If you need any help, be sure to contact customer support. They’ll be more than happy to help you out.

Thanks for reading and good luck!

Exit mobile version