JBL is a popular brand when it comes to headphones, and like any other electronic device, headphones may require resetting at some point. Resetting JBL headphones can be necessary to fix issues such as connectivity problems, audio issues, or to clear the memory of the device. In this article, we will provide you with a complete step-by-step guide on how to reset JBL headphones.
Before we begin, it’s important to understand that different models of JBL headphones may have different reset procedures. However, most JBL headphones can be reset using a similar procedure, and we will be covering the general reset process that can be used for most JBL headphones.
When Should You Reset JBL Headphones?
JBL headphones are renowned for their robustness, protracted battery life, and high-end audio. Yet, that does not imply that they are problem-free. Except for hardware issues, most issues with JBL headphones may be resolved with a hard reset.
The headphones’ default setting is restored after a hard reset. Hence, all recorded information, device data, volume preferences, and sound modes are deleted. In essence, it puts the headphones back in factory state.
But, you shouldn’t always reset the JBL headphones. JBL headphones should only be reset if:
- The JBL headphones will not connect to any devices.
- if your JBL headphones are not detected by devices.
- Every few seconds, the JBL headphones are disconnected.
- The sound comes in later.
- Less battery life is available.
- sound quality is poor.
- When JBL headphones are connected, no sound is heard.
- Headphones made by JBL won’t power on.
- The JBL headphones will not shut off.
- programme errors.
- Headphones by JBL won’t charge.
You must manually pair the JBL headphones with devices again after doing a hard reset. That’s because following a hard reset, the JBL headphones will no longer recognize the devices they were previously associated with.
Resetting JBL Wired Headphones
Step 1: Check the Battery
The first step before resetting your JBL headphones is to check the battery level. If the battery is low or empty, it may cause connectivity issues or malfunction. Therefore, charge the headphones fully before proceeding with the reset process.
[ADD IMAGE OF CHARGING JBL HEADPHONES]
Step 2: Turn Off the Headphones
Before resetting your JBL headphones, ensure that they are turned off. To turn off your JBL headphones, press and hold the power button for a few seconds until the LED light indicator turns off. It’s important to note that some JBL headphones may have a different power button location, so refer to the user manual for specific instructions.
Step 3: Enter the Reset Mode
The next step is to enter the reset mode of your JBL headphones. To do this, press and hold the power button and the volume up button simultaneously for at least ten seconds. The LED light indicator on your headphones will flash, indicating that the reset mode has been activated.
Step 4: Reset the Headphones
Once the reset mode has been activated, release both the power button and volume up button simultaneously. The LED light indicator will turn off, and then turn back on, indicating that the reset process has been completed. Your JBL headphones have now been reset to their default factory settings.
Step 5: Reconnect the Headphones
After resetting your JBL headphones, you will need to reconnect them to your device. To do this, turn on your JBL headphones and put them in pairing mode. To put your JBL headphones in pairing mode, press and hold the Bluetooth pairing button for a few seconds until the LED light indicator starts flashing.
Once the headphones are in pairing mode, you can connect them to your device via Bluetooth.
Step 6: Test the Headphones
After connecting your JBL headphones to your device, test them to ensure they are working correctly. Check the audio quality and volume, and ensure that the headphones are functioning correctly. If you notice any issues, repeat the reset process or contact JBL customer support for further assistance.
If you still need further help, check out the video below.
Resetting JBL Wireless Headphones
If you own JBL wireless headphones, the reset process is slightly different. Here’s a step-by-step guide on how to reset JBL wireless headphones:
Step 1: Turn Off the Headphones
To reset JBL wireless headphones, the first step is to turn them off. To turn off your headphones, press and hold the power button until the LED light indicator turns off.
Step 2: Clear the Pairing List
To clear the pairing list on your JBL wireless headphones, press and hold the Bluetooth pairing button and the volume up button simultaneously for at least five seconds. The LED light indicator will flash twice, indicating that the pairing list has been cleared.
Step 3: Enter Pairing Mode
After clearing the pairing list, your JBL headphones will automatically enter pairing mode. To put your headphones in pairing mode manually, press and hold the Bluetooth pairing button until the LED light indicator starts flashing.
Step 4: Connect to Your Device
To get the help of visual aids, check out the video below.
JBL JR 300BT Headphones
A distinctive collection of Bluetooth headphones for youngsters includes the JBL JR 300BT. These are designed for little ears, are more resilient, and have vibrant colors.
Below are the steps to reset these headphones:
- Be sure to turn on the headphones. Turn off Bluetooth in the device settings and disconnect the headphones from the device.
- Plug the USB Charger into the JBL JR 300BT Headphones. A pure white LED is what you want.
- After shutting off the headphones, unplug the USB cable.
- The headphones should activate manually and go into pairing mode. Around five seconds later, the LED will begin to flicker blue.
- Now that Bluetooth is enabled, you can re-pair the headphones by going to your device’s settings.
Once your JBL headphones are in pairing mode, connect them to your device via Bluetooth.
FAQs
Do JBL headphones have a reset button?
No, JBL Headphones do not have a dedicated reset button. However, if you follow the procedure below, you could quickly reset JBL Headphones.
For 20 seconds, simultaneously press and hold the volume up and volume down keys on the right ear cup. Let go of the buttons. When your JBL headphones have been reset, you will hear a sound.
Why is my JBL Bluetooth not working?
Make sure your speaker is paired with your device. Try unplugging and re-plugging the two. Make sure the volume is turned up on both your speaker and your device once they have been paired. Restart the speaker and try again if this doesn’t work.
Why are my JBL headphones Flashing blue and not connecting?
Your JBL gadget is on, powered by the battery, or plugged into the wall, according to flashing blue lights. The device is attempting to connect to your Bluetooth device or is currently doing so if the colors are alternating between blue and red. Your Bluetooth connections are indicated in solid blue.
There is simply a quick start manual included out of the box, and it is somewhat ambiguous. I’m not sure why you can’t connect, but try looking at your phone’s or tablet’s Bluetooth settings. The JBL Charge name should appear on the page that lists nearby devices once Bluetooth is turned on, and you can then choose to connect.
Bottom Line
If by chance your JBL Headphones stop working or get hanged, resetting them is your best bet at saving them. To reset your headphones, all you have to do is follow the steps mentioned in this article and hopefully, you will not have to get into the hassle of contacting customer care.
If you like listening to white noise while sleeping, or using noise cancellation, check out this article: 9 Best Earbuds for Sleeping Peacefully in 2023.