JLAB Go Air True wireless not charging? [Fixed]

JLab Go Air True wireless earbuds are known for their long 24+ hour battery life, good sound quality & comfort.

But now your wireless earbuds have a charging issue. So how do you fix it?

In this article, I will tell you How to fix JLab Go Air True wireless not charging?

JLab Go Air true wireless not charging

Make sense🤠?

I assume you come to the right place here at Beat mentors where you will get all the knowledge related to Sound technology.🔥🔥🔥

So let’s know how you can fix when JLab Go Air True wireless not charging?

How to fix JLab Go Air True wireless not charging?

If your JLab Go Air True wireless not charging properly? Don’t worry I will explain all the points in very easy language so that everyone can understand🤠

1.) Batteries haven’t been charged for a while

 The Battery is not in use
The Battery is not in use

There is a possibility that your JLab Go Air True wireless not charging because you are not using earbuds not much that’s why the battery is not charged for a while and in that situation, the battery’s life becomes affected badly.

So overcharging and no charging for a while can cause a charging issue.

2.) Charging cable is damaged

 The Charging cable is damaged

Charging cable can easily get damaged as it is very delicate. So what you need to see is whether the charging cable is in good condition or not? Now the question arises in your mind how can you identify that the problem is with your charging cable.

Just borrow the charging cable from your friends then try to charge with that and if that problem persists, then the problem is with the charging cable, not with your headphones.

3.) Clean your charging ports

Clean your charging ports. This is one of the most common reasons that devices don’t charge. If you have a JLab Go Air True wireless earbuds, and it’s not charging, then clean your charging ports with alcohol wipes or compressed air.

This will avoid any type of debris that’s preventing a proper connection with the charging port.

4.) Switch from USB to a power outlet

Try changing the way you charge your JLab Go Air True Wireless earbuds.

Steps you can try

  1. Remove them from the charging case and place them in your ears.
  2. Then remove the USB cable from the charging case.
  3. Then find a tabletop or stand that can provide at least an inch of clearance from the ground and plug it in there.

Note: If they don’t charge then repeat this step with another charger.

5. Broken wire

Broken wire
Broken wire

Another reason, a more practical one is a broken wire. Sometimes happen that wire is broken inside the earbuds. so what you can do is If you are electronically sound then you can easily fix that problem but if you’re not then don’t take too much risk & take it to the professionals they will definitely solve your problem for sure.

And It makes sense if earbuds are not maintained, then the charging issue will always be there.

6. Clean the earbuds

Clean the earbuds
Clean the earbuds

There is a possibility that JLab Go Air True wireless not charging because your earbuds are not clean enough & resist charging. Moreover, we have to consider very small things like ear wax.

The first thing to do is make sure your earbuds are clean. If you find gunk or dust on the inside of either side, give them a wipe with a cloth. If you don’t have one handy, use your earbud’s own silicone cover as its own cleaning tool, but be careful not to scratch or mark its surface.

7.) Restart the earbuds

If you have a charging problem in your earbuds then the first thing to try is a soft restart

  1. To do this, hold down the power button for three seconds until the light begins to flash.
  2. Then, release it and wait for about five seconds before pressing it again for three seconds
  3. This should cause the JLab Go Air True wireless to restart.

And I am sure JLab Go Air True wireless not charging issues will get solved

8.) Reset the earbuds

If you have tried all the methods above then there is one more method you can try out which my friend suggested to me.

Here are the steps you can do to reset the JLab Go Air True wireless.🔥🔥

  1. Turn off the power switch and allow the buds to completely shut down.
  2. Once you do this, press and hold the power button for 5 seconds until you see the LED flash blue
  3. Then set your device down on a flat surface while it reboots

9.) Clean the charging case

Make sure that your charging case is clean. (Most dirt and dust can be removed with a vacuum cleaner) Also, make sure that there are no obstructions or foreign material lodged between the earbuds. Also, try to clean off any debris stuck in the connection channels that charges your earbuds.

That can be the main reason that your earbuds are not charging, So before going to further conclusion you should cover your basic things.

Here for a better understanding, you can watch this video🔥🔥

How do make JLab battery’s Go Air True wireless last longer?

The wireless earbuds you love will keep working for longer if you take a few steps to care for them properly. To make the battery last longer then you have to consider simple steps.

Here are the points you must do

  1. Don’t overcharge the earbuds and it is recommended that you shouldn’t charge above 80%
  2. Keep earbuds away from water
  3. Keep earbuds away from direct heat for a long time
  4. It’s best to avoid rolling them in your pocket or throwing them in your purse together with other objects
  5. Try not to charge your earbuds while you sleep because you risk shortening their lifespan


Why are your wireless earbuds not charging?

Most of the time wireless earbuds not charging and in that situation It requires simple troubleshooting, such as restarting, repairing, or replacing a small component. In case it takes more than that to solve the problem, you should contact professionals.

How much time JLab Go Air True takes for full charging?

It takes about 2 hours to charge the JLab Go Air True Wireless Earbuds.

Is JLab Go Air waterproof?

JLAB Go Air is not waterproof. This item is protected by a thin silicon layer that helps protect the product from rain and sweat, but it is not waterproof.


At last, I just wanted to say that I used these steps several times successively, and my JLAB Go Air True wireless not charging works now well. So please let me know guys if that method also works for you in the comment section.

Happy reading!